Hand-Trimmed vs. Machine-Trimmed THCA Snow Caps: Which is Better?

THCA flower snow caps have taken over the cannabis market, basically offering a fresh and more potent twist on the already famous THCA flower buds.  THCA snow caps can be enjoyed in all of the same ways as THCA flower, and come in the same strains, while getting a major boost in THCA as they’re rolled up in crushed THCA diamonds. 

Just like with flower, there are all kinds of ways to determine the quality of THCA snow caps, ranging from the strains that they’re sold in, to the purity level of the THCA diamonds that cover each flower bud.  Another indicator that’s often overlooked is how the buds have been trimmed – if they even have been trimmed – as this can give you a good idea of the standards of the brand that you’re intending to buy from.

TO BUY THCA FLOWER SNOW CAPS CLICK HERE

The Basics on THCA Snow Caps

Before discussing trimming THCA flower buds that’re used to make snow caps, we need to offer a quick overview of what this product is, for those who don’t know.  THCA snow caps are a fairly new addition to the world of flower products, and it consist of THCA flower buds (hemp flower cultivated in a way that yields high concentrations of tetrahydrocannabinolic acid, which converts into delta 9 THC when heated), which have been rolled in THCA diamond dust.  THCA diamond dust is a pulverized form of pure THCA, which turns into crystals when undergoing an intensive purification process.

Basically, THCA snow caps are unbelievably potent, due to getting a powerful dose of THCA diamonds along with the THCA that’s inherently in the flower buds.  And again, the flower itself is no different from standard THCA flower, which means that it can be held to the same standards for quality, freshness, potency, etc. 

How THCA Snow Caps are Produced

It turns out that the process of making THCA snow caps is quite involved, despite the fact that there are just two components: THCA flower buds, and THCA diamonds.  As you’ll see below, there are a number of steps that need to be executed perfectly to end up with a high-quality and effective product.

Step #1: Starting Material Selection

The process begins with the selection of high-quality cannabis flowers rich in THCA.  These flowers are typically harvested early to ensure a high THCA content and avoid the conversion of THCA to THC.  The chosen strains are usually those known for their potency and terpenes profile, as these characteristics will significantly influence the final product’s quality.

Step #2: Flash-Freezing

Immediately after harvest, the cannabis flowers are flash-frozen.  This step is crucial as it preserves the plant’s cannabinoids and terpene profile by preventing degradation and the conversion of THCA to THC.  Flash-freezing involves exposing the flowers to very low temperatures (-20°C to -40°C or lower) very quickly.  This method also helps to retain the flower’s natural moisture, essential for the next steps.

Step #3: Crafting Diamonds 

From there, another batch of THCA flower is used to produce THCA diamonds.  This is the purified, crystalline form of THCA, which begins with applying a solvent to the flower material (which will be vacuumed out later to preserve its purity), and then concentrating the extract repeatedly until the THCA naturally separates from the terpenes, taking on a crystal-like form that is just pure tetrahydrocannabinolic acid.

Step #4: Pulverizing the Diamonds to Produce THCA Diamond Dust

The THCA diamond dust must be pulverized into a powder, to create the eventual coating of the buds.  This can be done by hand or machine, depending on the size of the company’s operation.

Step #5: Coating the Buds

Now, the THCA flower buds are ready to coat in the pulverized THCA diamonds.  The brand creating snow caps must make sure that they’re coating each bud evenly in a layer of THCA diamonds that’s not too thin nor too thick, to end up with the perfect concentration of tetrahydrocannabinolic acid in the total product (typically 50-70%).

Step #6: Shaping

Once coated, the material is then shaped into snow caps.  This is typically done by hand or with molds to ensure uniform size and appearance.  The snow caps are then stored under controlled conditions to maintain their potency and prevent degradation.

Step #7: Packaging and Storage

The final product is packaged in air-tight, light-proof containers to prevent any exposure to air, moisture, or light, all of which can degrade THCA.  Proper storage is vital to maintaining the snow caps‘ integrity and potency until they reach the consumer.

Why Should THCA Flower Snow Caps Be Trimmed?

The idea of trimming cannabis buds is actually relatively new, considering the fact that cannabis flower has been utilized around the world for thousands of years.  So, why is it such a staple of the industry now, whereas before, no one really paid much attention to whether or not flower buds were trimmed of their leaves and stems?

But, trimmed cannabis THCA flower buds have become more and more of a standard within the industry, mostly because of the emergence of dispensaries throughout the country, as companies want to offer better quality than what’s available on the black market.  

Trimming cannabis THCA flower buds is done prior to the dry-curing process, immediately following harvesting.  And, trimming offers clear benefits, like the ones below:

• By trimming each bud, you are removing ineffective components of the buds – the leaves and stems, mainly – which serve no purpose as they contain no beneficial compounds.  These components just bulk up the weight of the product at the time of sale.
• Trimmed buds are more aesthetically pleasing, as they offer a uniform and even shape.
• Trimming the buds allows the process of dry-curing to be executed more evenly, and for snow caps, it makes it easier to cover the buds evenly in THCA diamonds, as well.

THCA Snow Caps: Hand-Trimmed vs. Machine-Trimmed

Now, we’re going to compare hand-trimmed vs. machine-trimmed THCA flower buds, that are used to make THCA snow caps.  

Hand-Trimmed THCA Snow Caps

The more labor-intensive method is hand-trimming, which, of course, means that an actual individual is trimming each bud by hand, with specialized trimmers.  This is a very time-consuming process, needless to say, and the average hand trimmer can trim about 1-3 pounds of cannabis buds daily.  While skilled trimmers strive for uniformity, there can still be variation in the final product from time to time, due to human error or differences in judgment. Keep in mind that hand-trimmed flower is a requirement in order for a product to be deemed “boutique” or “exotic,” two terms which reflect the caliber of quality of a particular flower product.

Pros:

• A sign of artisanal craftsmanship.
• Employs people who wish to work in the cannabis industry.
• Offers more quality control as human eyes are going over each bud.
• Offers more precision, as machines cut more indiscriminately and can end up lopping off valuable components of the buds as well.
• Skilled trimmers can reduce waste by carefully removing only the necessary parts of the plant.

Cons:

• It’s labor-intensive and requires a lot of time.
• Lower yield than machine-trimming.
• It requires paying employees.

The labor-intensive nature of hand-trimming can lead to higher costs for the final product due to the time and skill required as we just mentioned.

Machine-Trimmed THCA Snow Caps 

The other method is machine-trimming, which is the newer method, and one that is more common than hand-trimming since it’s more time-efficient.  Trimming by machine is a way to make each bud more uniform, and there are various types of machines that can do the job of trimming, which means that whether a cultivator has a large or small facility, they can invest in the right equipment to make sure that the buds can be trimmed by a machine.

Machine-trimming is generally viewed as the lower-quality option, since it takes less effort.  But, for the sake of fairness, we want to point out that machine-trimmed THCA snow caps are not less likely to get you high, less likely to taste good, or any other factors that influence how satisfied you’ll feel when and after consuming them.

Pros:

• Higher output than hand-trimming, pound for pound.

• More uniform buds (although that can be a con, as you will see below).

• Saves cultivators money as they don’t need to employ someone to do the work for them.

• Takes less time and requires virtually no physical labor.

Cons:

• Can leave you with generic-looking buds that don’t highlight the unique characteristics of individual strains.
• Lower quality control.
• Machines can end up chopping pieces off of buds that actually have value, in an effort to create a uniform shape and size, as this creates waste.

Bloomz Has Got Boutique-Level Hand-Trimmed THCA Snow Caps Ready for You!

You really can’t go wrong by choosing hand-trimmed THCA snow caps, as this indicates that the brand making the snow caps cares a lot about artisanal craftsmanship – a standard that likely applies to every step of making their THCA snow caps, from how they cultivate each industrial hemp plant, to how they coat their buds in a rich layer of THCA diamonds.  

At Bloomz, you will be treated to only hand-trimmed snow caps, in top-quality strains, all of which’re bursting with potent THCA and fragrant terpenes.  For the best that the snow caps market has to offer, come check us out today!

Hand-Trimmed THCA Snow Caps is a method that an actual individual is trimming each bud by hand, with specialized trimmers. Offers more precision, as machines cut more indiscriminately and can end up lopping off valuable components of the buds as well.

Skilled trimmers can reduce waste by carefully removing only the necessary parts of the plant. machine-trimming, which is the newer method, and one that is more common than hand-trimming since it’s more time-efficient. At Bloomz, you will be treated to only hand-trimmed snow caps, in top-quality strains, all of which’re bursting with potent THCA and fragrant terpenes. 

TO BUY THCA FLOWER SNOW CAPS CLICK HERE